Low cost Second user Thermal Printers

ZEBRA RRP: £376.00 ex-VAT

LP-2622SET - Printers with Label taken sensor – Direct Thermal Printer 1 used: £70.00 ex-VAT

————————————————————————

ZEBRA RRP: £385.00 ex-VAT

2722-10130-0001 - Printers

TLP2722SE – T/T D/T 2in Serial Printer 1 used: £120.00 ex-VAT

————————————————————————

ZEBRA RRP: £405.00 ex-VAT

2742-20330-0001 – Printers

LP2742PSE – D/T 4in Printer 1 used: £95.00 ex-VAT

————————————————————————

ZEBRA RRP: £455.00 ex-VAT

2722-20130-0001 - Printers

LP2722SE – D/T 2in Serial Printer 2 used: £69.00 ex-VAT

————————————————————————

ZEBRA RRP: £460.00 ex-VAT

2844-20420-0001 - Printers

LP2844PSE – 200dpi DT EPL Desktop with internal ZEBRAnet Printserver 1

used: £299.00 ex-VAT

————————————————————————

ZEBRA RRP: £460.00 ex-VAT

2844-20430-0001 - Printers

LP2844PSE 200dpi DT EPL Desktop with ZEBRAnet (Superseded by

2844-20420-0001) 1 used: £235.00 ex-VAT

————————————————————————

TEC RRP: £462.00 ex-VAT

B-SV4D-GS12-QM-R - Printers

4 inch 203dpi Desktop Printer – with LAN interface 1 used:

£255.00

ex-VAT

————————————————————————

ZEBRA RRP: £479.00 ex-VAT

2722-20131-0001 - Printers

LP2722SET – D/T 2in Serial Printer+Lts 2 used:

£99.00 ex-VAT

————————————————————————

ZEBRA RRP: £515.00 ex-VAT

2844-10420-0001 - Printers

TLP2844PSE with internal ZEBRAnet Printserver 1 used:

£350.00

ex-VAT

————————————————————————

ZEBRA RRP: £530.00 ex-VAT

TLP-2242-PS - Printers

4in DT/TT Printer – P/N 120143-001 1 used:

£99.00

ex-VAT

————————————————————————

ZEBRA RRP: £560.00 ex-VAT

3844Z-10320-0001 - Printers

TLP3844-ZPL – 300dpi TT ZPL Desktop standard printer 1 used:

£285.00

ex-VAT

————————————————————————

ZEBRA RRP: £699.00 ex-VAT

S4M00-200E-1100D - Printers 1 new:

S4M DT – ZEBRA Std Printer – 200 dpi with ZPL & Peel

£496.00

ex-VAT

————————————————————————

ZEBRA RRP: £715.00 ex-VAT

3842-10332-0001 - Printers 6 new:

TLP3842PS with UK plug and Cutter

£365.00

ex-VAT

————————————————————————

ZEBRA RRP: £729.58 ex-VAT

TLP-3642-PS - Printers

4in DT/TT Printer – 3642-10320-0001 2 used:

£99.00

ex-VAT

————————————————————————

ZEBRA RRP: £765.00 ex-VAT

384Z-10322-0001 - Printers

TLP3844 – 300dpi TT ZPL Desktop with cutter 2 used:

£390.00

ex-VAT

————————————————————————

ZEBRA RRP: £790.00 ex-VAT

LP-3642-PS - Printers

4in DT printer – 300dpi P/N120266-002 1 used:

£124.00

ex-VAT

All prices are exclusive of VAT and delivery e&oe

Item quantities are correct at the time of publication, however as quantities can change daily, please call to confirm if the item(s) are available or email

seconduser@lancerlabels.co.uk

www.lancerlabels.co.uk

WARRANTY CONDITIONS

As with every product supplied by Lancer Labels we want you to be completely happy with purchases made through Lancer. If you are not satisfied you can return any purchase (at your cost and insurance) within fourteen days of the invoice date for a full refund. The refund will be made to the same credit card used to purchase the goods. To request a return – send an email to the email address on your invoice.

All products are shipped with a 14 day warranty from invoice date.

If the product becomes defective you can return it for repair. If it is still under warranty and has not been subject to user damage or abuse we will attempt to repair and return free of charge. If we are unable to repair the unit (for example due to non-availability of spare parts) we will offer you a full refund instead. If the unit is no longer under warranty you can still request a repair, but parts, labour and carriage charges will apply. A quotation will be provided.

To request a repair – send an email to the email address on your invoice

Purchase by Credit Card or Cheque only.

Metrologic MK7820 special offer

From time to time Lancer Labels can offer special prices on new and overstock products. From 21st September to October 12th we are able to offer this fantastic new scanner at a know down price

Designed to increase system output and lower the total cost of ownership, the MS7820 reduces on-site service costs and downtime in all retail environments.

With an extended depth of field and advanced decoding software, cashiers can scan all standard bar codes on the first pass with minimal concern for orientation or print quality.

Multiple on-board interfaces make the MS7820 compatible with most POS systems, while automatic detection of the interface cable expedites system configuration. The MS7820 further simplifies integration by drawing power directly from the host’s 12-volt USB or serial port.

Unlike other comparable devices, the MS7820 includes a troubleshooting visual diagnostic indicator and the capability to perform remote Flash upgrades or software configurations. For investment protection, every scanner comes standard with an integrated RF EAS antenna (must be specified at point of order if required) and the capability to perform interlock with either Checkpoint or Sensormatic systems.

• 1800 scan lines per second
• Optional 2 Flex-Pole stands for counter top or wall mounted applications
• Optional field replaceable protective window for demanding check out requirements
• 2 Year Warranty
• Special Price – £266.00
• Contact www.lancerlabels.co.uk
  

Anti Microbial Labels fight MRSA/Ecoli

Antimicrobial Labels for printers

Lancer Labels releases New Anti microbial label material

to assist in the fight against hospital acquired infections,

such as MRSA and E-coli type microbes.

Available in three different type of Antimicrobial materials

1/ Clear

2/ Satin Gloss

3/ Vellum

All materials are self adhesive and can be used in most manufacturers of Thermal Transfer printers. Labels can be of any size to suit the printer.

Typical laboratory test results are : -

Determination of the Antibacterial Activity against MRSA and E coli using a Test Based on Japanese Industrial Standard JIS Z 2801.

E coli 1.8E+04 < 11.11 = 3.20 = 99.94%

MRSA 2.0E+04 < 11.11 = 3.26 = 99.94%

The above data shows the change in population following contact with the surface of the samples listed for 24 hours
at 35°C under a RH of > 95%

The material uses a silver based biocide against MRSA and E coli

Lancer Labels introduces Antimicrobial scanner & Mobile terminal details

Contact

Lancer Labels

Tel: +44 0845 833 0854

Fax: +44 0870 458 6883

thermal Labels label labels barcode printing

thermal Labels label labels barcode printing

We have a great deal of expertise in solving general Labelling and Label Printing problems for users with difficult application requirements. If you have a Labelling or Label Printing problem that that you cannot find the answer too, why not try asking Lancer Labels, we will do our utmost to give you a suitable solution on this FAQ page.

Will you have to buy from Lancer if you ask a question? – No!!! there is no obligation

What’s in it for Lancer Labels you ask? – We can use our extensive knowledge in this area and if we don’t know the answer, we can increase our knowledge by using our contacts in the industry to give you an answer.

Just contact us and see for yourself.

Lancer Labels will not be liable for any direct, indirect or consequential loss or damage (including, but not limited to, loss of income or profit) arising out of or in connection with this website or any information contained in or downloaded from this website, except to the extent that such liability may not be excluded at law.

Q1 – I want to find out more about bar coding, where do I start?

A1 – This is a very common question, we recommend you visit these links and read up on the subject. If you still have questions. please do not hesitate to contact us directly. Bar coding Terminology Barcoding information

Q2 – My Zebra 105 printer is starting print halfway across the label, can you urgently get a service engineer to look at it.

A2. – It sounds as if the printer is not detecting the edge of the label, perform a media calibration and try again. If it still happens check that there is no debris/dust in the paper sensor path On this printer it will be a black plastic device on the top and bottom of the paper path next to the chassis. The customer checked and found a piece of label obscuring part of the sensor, they saved a very expensive service call.

NB – Yes! Lancer Labels could have sent a service engineer, however we are the first line of defence for our customers, it’s part of our service to help the customer get back into operation by the best means.

-

Q3. – These labels you provided for my TEC372 printer will not work, the print will not align on the label.

A3 – There are variations in the material properties of both the paper label and the backing paper that can result in the printer not sensing the gap between labels. Some printers have a media calibration routine to cope with this. With the TEC372 you can choose between 3 sensors settings.
Reflective – For use with labels with a black sensor mark on the backing paper
Transmissive1 – For use with most standard paper and backings.
Transmissive2 – For use with Pre printed labels or when media will not work with sensor 1.
Change your sensor selection to Transmissive 2, this can be found in Printer Setup.

Q4. – We have to cure our products in an oven at 143 Deg C for 20 minutes, we want to label them prior to going into the curing procedure. We have tried normal paper labels but they sometimes fall off, can you help.

A4 – A normal paper label and adhesive is not meant for this type of environment. There are a number of high temperature synthetic label materials that may suit this environment Before going to this expense you could try using a quality laser label, they tend to have a better resistance to heat than normal paper labels as they are subjected to heat during the laser printing process. Let me know how you get on.

Q5.
- We currently use a Polyester label with sequential numbers for warranty
purposes, on equipment’s that we sell. We suspect that some customers
are moving the labels between equipment’s and claim warranty on items
that are out of warranty date. Do you have any idea what we can do to
prevent this.

A5.
- This is quite a common occurrence. There are several types of “Tamper
Evident” labels that can be used in this application.

Type 1 – The label is destroyed when removal is attempted, available
in Vinyl, Paper and Polyolefin.

Type 2 – This label leaves a diamond or chequerboard pattern or the
word “void” when removal is attempted, available in Metallised
Polyester.

Either of these labels should be suitable for your application, they
can be preprinted with sequential numbers and replaced when service
or warranty takes place.

Q6.
- We manufacture flat computer cables that have ridges on the surface,
our current vinyl labels are peeling off after several days, do you
have any solutions to this?.

A6.
- Normal permanent adhesive requires a flat surface for good adhesion.
The cables you use are used in most PCs and the ridges do not allow
sufficient surface area for good adhesion. I suggest you try a label
with a Hi Tak or rubber based adhesive, both of these types are very
aggressive adhesives and should be suitable for your application.

Q7.
- We are a large Direct Distribution company running MRP SAP R4, we
are having problems finding a suitable SAP Barcode software and printers
with a reliable ethernet. What
do you recommend?.

A7.
- We have recently installed three Zebra 170XiII printers with integral
ethernet interfaces onto a SAP R4 system and used Zebra’s Bar-One R4
bar-coding software for generating the labels for these printers. Zebra
have developed their Bar-One software for SAP R4 with a lot of thought
and it seems to integrate easily into the system. There are other bar-code
software’s on the market and the review I am sending you will help you
to make your choice for your particular application requirement.

Q8.
- We are an Actuary and have a lot of documents each day that we need
to scan the signatures, our current method is using a flatbed scanner
but this is too slow, can you suggest an alternative.

A8.
- A flatbed scanner is fine for scanning a full sheet but when you want
to scan a small signature it still has to scan the whole page and subsequently
takes a long time. You also have to select the signature area and save
it a a bitmap file – long winded.

We would suggest an “Image Capture Scanner”,
it can be used for linear barcodes, 2D barcodes and signatures or other
small image areas. It will instantaneously scan the image and save as
a bitmap, which can then be recalled as required. Visit our
scanners page and
click on the manufacturers logo to see what is available. Our personal
preference for this application would be the Welch Allyn ImageTeam 4410LR.

Protected: Healthcare labelling and patient identification solutions

This post is password protected. To view it please enter your password below:

Password: